Filter
Top Products
Reference: Remote Commands ~ Command Description
OTS9100 User Manual 3-55
:SOURce:DATA:POH:DEFAult
This command sets all bytes in the generated STS-1 #1 Path Overhead data to their default values.
Syntax :SOURce<slot>:DATA:POH:DEFAult
:SOURce:DATA:RATE
This query returns the output signal rate generated by the OTS transmitter.
Syntax :SOURce<slot>:DATA:RATE?
Parameters Description
G10A 10 Gb/s (OC-192 or STM-64)
:SOURce:DATA:SECTion:TRACe
This command sets the data sequence length and data byte values transmitted in the Section Trace (J0)
byte of the Transport Overhead. The data bytes are formatted as a standard IEEE-488 data block. The
query form returns the current settings.
Syntax :SOURce<slot>:DATA:SECTion:TRACe?
:SOURce<slot>:DATA:SECTion:TRACe <Enum> ,<Block>
Parameters Description
L1B Constant 8-bit data
L16B A repeating sequence of 16 bytes, 0-filled with CRC
L16FREE A repeating sequence of 16 bytes, arbitrary format
L64B A repeating sequence of 64 bytes, space-filled with CR/LF
L64FREE A repeating sequence of 64 bytes, arbitrary format
:SOURce:DATA:SECTion:TRACe:TYPE
This command sets the data sequence length transmitted in the Section Trace (J0) byte of the Transport
Overhead. The query form returns the current setting.
Syntax :SOURce<slot>:DATA:SECTion:TRACe:TYPE?
:SOURce<slot>:DATA:SECTion:TRACe:TYPE <Enum>
Parameters Description
L1B Constant 8-bit data
L16B A repeating sequence of 16 bytes, 0-filled with CRC
L16FREE A repeating sequence of 16 bytes, arbitrary format
L64B A repeating sequence of 64 bytes, space-filled with CR/LF
L64FREE A repeating sequence of 64 bytes, arbitrary format