Filter
Top Products
Operating Basics: User Interface
2-40 OTS9100 User Manual
Transmitter – K1, K2 Decode
The K1, K2 Decode menu, as shown in Figure 2-24, of the Transmitter setup allows the user to
edit the K1 and K2 bytes for Automatic Protection Switching (APS) measurements.
Figure 2-24: Transmitter – K1, K2 Decode menu
To edit, click the Edit K1,K2 Bytes button. This brings up a dialog box, shown in Figure 2-25.
The dialog box displays the current K1,K2 settings and allows the option to edit the byte via
hexadecimal or symbolic form (a subset of 0x00...0xFF).