Filter
Top Products
Reference: Remote Commands ~ Command Description
OTS9100 User Manual 3-29
:SENSe:DATA:PATH:TRACe:TYPE
This query returns the most recently received J1 path trace type (length). See the command
:SOURce:DATA:PATH:TRACe:TYPE for the format of the enum value returned.
Syntax: :SENSe<slot>:DATA:PATH:TRACe:TYPE?
:SENSe:DATA:PATH:TRACe:VALUe
This query returns the most recently received J1 path trace data. The data bytes are returned in IEEE-
488 block data format.
Syntax: :SENSe<slot>:DATA:PATH:TRACe:VALUe?
:SENSe:DATA:PATH:TRACe:VALUe:STRIng
This query returns the most recently received J1 path trace data. The data is returned as an ASCII string.
Syntax: :SENSe<slot>:DATA:PATH:TRACe:VALUe:STRIng?
:SENSe:DATA:PAYLoad:PATTern
This command selects the test pattern for the received signal. The query form returns the current setting.
Syntax: :SENSe<slot>:DATA:PAYLoad:PATTern?
:SENSe<slot>:DATA:PAYLoad:PATTern <Enum>
Parameters Description
PRBS15A ITU standard PRBS 2^15-1 pattern
PRBS15I Inverted PRBS 2^15-1 pattern
PRBS23A ITU standard PRBS 2^23-1 pattern
PRBS23I Inverted PRBS 2^23-1 pattern
PRBS31A ITU standard PRBS 2^31-1 pattern
PRBS31I Inverted PRBS 2^31-1 pattern
ZEROs Constant zero data
ONEs Constant one data
USER Constant 8-bit user-specified
LIVE Live data