Filter
Top Products
Operating Basics: User Interface
OTS9100 User Manual 2-59
Path Trace (J1)
The Path Trace (J1) provides the current values of the J1 multi-byte trace. The 16-byte J1 Trace
receives 15 bytes ending with a CRC. The 64-byte J1 Trace receives 62 bytes with CR LF. The
Expected and Received values are both displayed, providing an easy visual comparison of the J1
Trace. The length of the Trace is also provided as both expected and received values.
C2 Status
C2 Status displays the received and expected C2 byte values. The C2 byte value is decoded and
displayed in ASCII format. To edit the C2 byte, go to the Path Overhead section of the
Transmitter setup and enter the desired hexadecimal value.