Filter
Top Products
Reference: Remote Commands ~ Command Description
3-66 OTS9100 User Manual
:SYSTem:COMMunicate:NETWork:ECHO
This command sets the initial value of the echo control variable for new network connections. This setting
has no effect on connections already established (see :SYSTEM:COMMUNICATE:PORT:ECHO). The
query form returns the current setting.
Syntax :SYSTem:COMMunicate:NETWork:ECHO?
:SYSTem:COMMunicate:NETWork:ECHO <NR1>
Bit value Function
0 Disables echo
1 Enables echo
2 Causes the input terminator character to be echoed as CR-LF
4 Enables input line buffering: received characters are not processed until the
terminating CR or LF
:SYSTem:COMMunicate:NETWork:IPPORT
This command sets the IP port address on which the system listens for new connections. Changing the
setting has no effect on connections already established. The query form returns the current setting.
Syntax :SYSTem:COMMunicate:NETWork:IPPORT?
:SYSTem:COMMunicate:NETWork:IPPORT <NR1>
:SYSTem:COMMunicate:NETWork:PROMpt
This command sets the initial state of the user prompt on new network connections. This setting has no
effect on connections already established (see :SYSTEM:COMMUNICATE:PORT:PROMPT). The query
form returns the current setting.
Syntax :SYSTem:COMMunicate:NETWork:PROMpt?
:SYSTem:COMMunicate:NETWork:PROMpt <Boolean>
:SYSTem:COMMunicate:NETWork:RXTERM
This command sets the initial selection, for new network connections, of the character recognized as End-
of-Input. This setting has no effect on connections already established (see
:SYSTEM:COMMUNICATE:PORT:RXTERM). The query form returns the current setting.
Syntax :SYSTem:COMMunicate:NETWork:RXTERM?
:SYSTem:COMMunicate:NETWork:RXTERM <Enum>
Parameters Description
LF Line feed (LF) character, 0x0A; an optional preceding CR is ignored
CR Carriage return (CR) character, 0x0D; an optional preceding LF is ignored