Filter
Top Products
Specifications
A-16 OTS9100 User Manual
Certifications and Compliance
Laser Safety
The lasers in the OTS9100 module comply with the following:
U.S. Class IIIb per 21 CFR 1040
European Class 3A per IEC 60825-1
CE Mark Compliance
EMC Compliance Directive
OTS9100 Series 10 Gb/s SONET/SDH Test Module using the OTS9000 Optical Test System
meets the essential requirements per Article 10 of Directive 89/336/EEC for Electromagnetic
Compatibility using the Technical Construction File (TCF) Route.
Competent Body issuing Certificate of Conformity: TÜV Product Service
Listing of Harmonized Standards applied:
EN 55022 Class A Radiated and Conducted Emissions
EN 61000-3-2 Quasi-stationary Current Harmonics
EN 61326: 1997 Immunity
IEC 1000-4-2 ESD Immunity Performance Criterion B
1
IEC 1000-4-3 Radiated Immunity Performance Criterion A
1
IEC 1000-4-4 EFT Burst Immunity Performance Criterion B
1
IEC 1000-4-5 Fast Surge Immunity Performance Criterion B
1
IEC 1000-4-6 Conducted Immunity Performance Criterion A
1
IEC 1000-4-11 Voltage Interruptions Performance Criterion B
1
1
Specified by EN 61326
Conditions:
Requires the following option - OTS9000 Option E1
Equipment must be installed within a proximity of no less than 70m to any radio
service to minimize possible interference. If interference is unavoidable, further
actions may be required. Contact Tektronix for consultation.
OTS9100 Series 10Gb/s SONET/SDH Test Module using the OTS9010 or OTS9040 Optical
Test System meets the intent of Directive 89/336/EEC for Electromagnetic Compatibility for all
modules with serial number B000300 or higher.