Filter
Top Products
Operating Basics: User Interface
OTS9100 User Manual 2-45
Transmitter - IP Error Insertion
The IP Error Insertion Property menu consists of property controls for Stream Index, Error
Selection, Error Type, Error Rate, Minimum. Rate, Maximum. Rate, and Current Error Insertion
display drop down menus supply other options for each category.
Figure 2-28: IP Error Insertion Menu
The Stream Index is fixed at a value of 1.
The Current Error Insertion section is only available if there is an Error Type selected under the
Error Selection area.
Error Selection
The Error Type is selected by using the pull down menu. The Error Types available include:
• None
• HDLC FCS Error
• IP Payload Error
• IP Header Checksum Error
Once the error type is selected, the Error Rate must be selected. Use the up/down cursors or just
type in the rate. For the maximum rate, click the Max Rate button.
The default setting for error type is None so before the Current Error Insertion menu is available,
an error type must be selected and applied.
NOTE: The Apply Changes button must be clicked before the changes become active.