Filter
Top Products
TP-6200 10/12 93Section 2 Operation
Local Programming Mode On
Menu 7—Generator System, continued
Menu 7 Displays with Key Entries
Key
Entry Display Description
BATTERY VOLTAGE →
(see note) YES
Displays the battery voltage selection. Note: The display sample
may differ depending upon previous entries. The user-selected
battery voltage appears first, either 12 VDC or 24 V DC.
BATTERY VOLTAGE →
12 VDC NO
Displays the 12 VDC battery voltage selection. When required, use
the YES key to choose the 12 VDC battery voltage.
LOW BATTERY VOLTAGE
?.? VDC
Displays the low battery voltage setting. When required, use the
numeric keys to set the new value. Press the Menu Right → key
prior to entering the decimal value.
HIGH BATTERY VOLTAGE
?.? VDC
Displays the high battery voltage setting. When required, use the
numeric keys to set the new value. Press the Menu Right → key
prior to entering the decimal value.
Enter YES to change the battery voltage to 12 VDC and press the
Enter key.
Confirms the entry.
BATTERY VOLTAGE →
12 VDC YES
BATTERY VOLTAGE →
12 VDC YES
OR
BATTERY VOLTAGE →
24 VDC NO
Displays the 24 VDC battery voltage selection. When required, use
the YES key to choose the 24 VDC battery voltage.
Enter YES to change the battery voltage to 24 VDC and press the
Enter key.
Confirms the entry.
BATTERY VOLTAGE →
24 VDC YES
BATTERY VOLTAGE →
24 VDC YES
Displays the corrected low battery voltage setting.
LOW BATTERY VOLTAGE
#.# VDC
Displays the corrected high battery voltage setting.
HIGH BATTERY VOLTAGE
#.# VDC
LOW BATTERY VOLTAGE
?.? VDC
Use the numeric keys to enter the decimal value. Press the Enter
key.
AND
Use the numeric keys to enter the decimal value. Press the Enter
key.
AND
HIGH BATTERY VOLTAGE
?.? VDC
BLOCK HEATER ON # F
Displays the block heater energize temperature setting. When
required, use the numeric keys to set the new value. Applies to
DDC/MTU engines with MDEC/ADEC only.
Displays the corrected block heater energize temperature setting.
BLOCK HEATER ON # F
Use the numeric keys to enter the decimal value. Press the Enter
key.
AND
BLOCK HEATER ON ? F
BLOCK HEATER OFF # F
Displays the block heater deenergize temperature setting. When
required, use the numeric keys to set the new value. Applies to
Detroit Diesel engines with MDEC/ADEC engine controls only.
Displays the corrected block heater deenergize temperature setting.
BLOCK HEATER OFF # F
Use the numeric keys to enter the decimal value. Press the Enter
key.
AND
BLOCK HEATER OFF ? F