Filter
Top Products
TP-6200 10/12108 Section 2 Operation
Local Programming Mode On
Menu 10—Output Setup, continued
Menu 10 Displays with Key Entries
Key
Entry Display Description
Indicates whether the previously user-defined analog output was
selected (yes or no) as a low shutdown fault.
COMMON FAULT Y/N
A01 LO SHUTDOWN→
Press the Enter key.
Confirms the entry.
COMMON FAULT YES
A01 LO SHUTDOWN→
COMMON FAULT YES
A01 LO SHUTDOWN→
Entering YES adds the low shutdown selection to the defined analog
fault group.
COMMON FAULT NO
A01 LO SHUTDOWN→
OR
Confirms the entry.
COMMON FAULT NO
A01 LO SHUTDOWN→
COMMON FAULT NO
A01 LO SHUTDOWN→
Press the Enter key.
COMMON FAULT YES
A01 LO SHUTDOWN→
Entering NO removes the low shutdown selection from the defined
analog fault group.
COMMON FAULT NO
A01 HI SHUTDOWN→
OR
Press the Enter key.
Confirms the entry.
Confirms the entry.
COMMON FAULT YES
A01 HI SHUTDOWN→
COMMON FAULT YES
A01 HI SHUTDOWN→
COMMON FAULT NO
A01 HI SHUTDOWN→
COMMON FAULT NO
A01 HI SHUTDOWN→
Press the Enter key.
Indicates whether the previously user-defined analog output was
selected (yes or no) as a high shutdown fault.
COMMON FAULT Y/N
A01 HI SHUTDOWN→
Entering YES adds the high shutdown selection to the defined analog
fault group.
COMMON FAULT YES
A01 HI SHUTDOWN→
Entering NO removes the high shutdown selection from the defined
analog fault group.
Returns the user to common fault (analog inputs) heading.
Press the Menu Down key to continue to the next selection A02--A07
(repeat as necessary).
COMMON FAULT Y/N
Axx
(see Group D) LO
WARNING→
Gives the user the option to add or delete selection from the next
defined analog fault. Note: Use the A01 common fault analog input
setup procedure shown above for A02--A07. Go to
Group D
Up to 7 analog inputs, PC user-
defined status events and faults
designated as A01 to A07.
Each of the 7 is assignable as a
shutdown or warning with high
and lo
w
settin
g
s.
COMMON FAULT Y/N
A01 LO WARNING→