TP-6200 10/12 63Section 2 Operation
MENU 9
INPUT SETUP
SETUP DIGITAL →
AUXILIARY INPUTS
DIGITAL INPUT 01 →
(USER DEFINED DESC)
Press the down arrow to
scroll through additional
DIGITAL auxiliary inputs
1--21 or enter the input
number.
TO ANALOG INPUT
SETUP (NEXT)
DIGITAL INPUT 01 →
ENABLED YES/NO
DIGITAL INPUT 01 →
INHIBIT TIME ?:??
Menu 9 Overview
DIGITAL INPUT 01 →
DELAY TIME ?:??
DIGITAL INPUT 01 →
(see Group A) YES/NO
Group A
The preprogrammed
selections include the
following list. See
Appendix E for
application and
restrictions with specific
engines.
WARNING Y/N
SHUTDOWN TYPE A Y/N
SHUTDOWN TYPE B Y/N
VOLTAGE RAISE Y/N
VOLTAGE LOWER Y/N
Group A, continued
VAR PF MODE Y/N
REMOTE SHUTDOWN Y/N
REMOTE RESET Y/N
AIR DAMPER Y/N
LOW FUEL Y/N
FIELD OVERVOLTAGE Y/N
IDLE MODE ACTIVE Y/N
BATTLE SWITCH Y/N
GROUND FAULT Y/N
BAT CHGR FAULT Y/N
HIGH OIL TEMP Y/N
Group A, continued
LOW COOLANT LEVEL Y/N
LOW COOLANT TEMP Y/N
BREAKER CLOSED Y/N
ENABLE SYNCH Y/N
AFM SHUTDOWN Y/N
KNOCK SHUTDOWN Y/N
DETON WARNING Y/N
DETON SHUTDOWN Y/N
LOW FUEL SHUTDOWN Y/N
SETUP ANALOG →
AUXILIARY INPUTS
ANALOG INPUT XX →
(USER DEFINED DESC)
TO DIGITAL INPUT
SETUP (PREVIOUS)
ANALOG INPUT XX →
WARNING ENABLED Y/N
ANALOG INPUT XX →
SHUTDOWN ENABLED Y/N
ANALOG INPUT XX →
INHIBIT TIME ?:??
ANALOG INPUT XX →
WARN DELAY TIME ?:??
ANALOG INPUT XX →
HI WARN VALUE ??
ANALOG INPUT XX →
HI SDWN VALUE ??
ANALOG INPUT XX →
SDWN DELAY TIME ?:??
ANALOG INPUT XX →
LO WARN VALUE ??
ANALOG INPUT XX →
LO SDWN VALUE ??
Note: For ECM engines, auxiliary analog inputs
A01--A07 will appear.
Note: For non-ECM engines, auxiliary analog inputs
A03--A07 will appear.
Note: For Waukesha engines, auxiliary analog inputs
A05--A07 will appear.