Filter
Top Products
TP-6200 10/12168 Section 6 Accessories
6.1.2 Common Failure Relay Kit
The common failure relay kit provides one set of
contacts to trigger user-provided warning devices if a
fault occurs. T he common failure relay faults are
user-defined. See Section 2, Operation, Menu 10—
Output Setup, for status and faults available for this
function.
Connect up to three common failure relay kits to the
controller output. See Figure 6-4 and Figure 6-5. See
Section 6.2, Accessory Connections, for terminal
identification.
6.1.3 Controller (Customer) Connection
Kit
The controller connection kit allows easy connection of
controller accessories without accessing the controller
terminal strip. The supplied wiring harness connects
controller connector P23 and terminal strips TB1-3 and
TB1-4 to the controller connection kit connector P25 and
terminal strips TB6, TB7, TB8, and TB9. Connect all
accessories (except the emergency stop kit) to the
controller connection kit terminal strips. See Figure 6-6.
See Section 6.2, Accessory Connections, for terminal
identification.
6.1.4 Float/Equalize Battery Charger Kit
with Alarm Option
The float/equalize battery charger with alarm option
provides battery charging to the engine starting
battery(ies) and connects to the controller for fault
detection. Battery chargers for 12- or 24-volt models are
available as a generator set accessory. See Figure 6-7.
See Section 6.2, Accessory Connections, for terminal
identification.
C-294301
Figure 6-4 Common Failure Relay Kit
GM13984-
CONTROLLER CONNECTION KIT MOUNTED IN JUNCTION BOX
Figure 6-5 Common Failure Relay Kit Connections