Filter
Top Products
TP-6200 10/1216 Section 1 Specifications and Features
1. Generator set master switch, run/off-reset/auto positions
(keyswitch option)
2. Emergency stop switch
3. Alarm horn (see keypad for alarm silence)
4. Annunciator lamps (see keypad for lamp test)
5. Digital display
6. Keypad
7. Operating guide
8. Controller terminal strips (on circuit board)
TP-6083-2
12 4 5
7
8
3
6
Figure 1-2 550 Controller with Keyswitch Option
1.2.1 Annunciator Lamps
Five annunciator lamps provide visual generator set
status. See Figure 1-3.
TP-6083-2
Figure 1-3 Annunciator Lamps
System Ready. Green lamp illuminates when the
generator set master switch is in the AUTO (automatic
start) position and the system senses no faults. The unit
is ready to start.
Not in Auto (NIA). Yellow lamp illuminates when the
generator set master switch is not in the AUTO
(automatic start) position.
Programming Mode. Yellow programming lamp
indicates the user selected programming mode. See
Figure 1-4.
Programming Lamp Programming Mode Selection
Lamp Flashing Local Programming
Lamp Steady On Remote Programming
Lamp Off Programming Disabled
Figure 1-4 Programming Lamp Mode
Note: Find additional information for the programming
mode lamp function and access to the local or
remote programming modes in Section 2.8, Local
Programming Mode On, Menu 14—Programming
Mode.