TP-6200 10/1222 Section 1 Specifications and Features
Figure 1-10 shows locations of the terminal strips on the
controller interconnection circuit board. See Section 6.2,
Accessory and Connections, for specific terminal
identification information. Refer to the wiring diagrams
for additional information on connecting accessories to
the terminal strips.
1. TB1 terminal strip
2. TB2 terminal strip
3. P1 Connector
ADV-6533-A
2
4
1
56
4. P23 Connector
5. TB3 terminal strip
6. TB4 terminal strip
3
Figure 1-10 Interconnection Circuit Board Terminal
Strips and Connectors
1.2.7 Circuit Board Interconnections for
Calibration Procedure
The interconnection circuit board shown in Figure 1-11
contains a ribbon connector that requires disconnection
during the calibration procedure in Menu 12—
Calibration. Disconnect ribbon connector P2 prior to
zeroing out (resetting) the auxiliary analog inputs.
2
4
1
1. Interconnection circuit board
2. P2 ribbon connector
3. P12 ribbon connector
4. Main logic circuit board
ADV-6533-A
4
Figure 1-11 Interconnection Circuit Board Ribbon
Connector P2 (Top View of Circuit Board)