Filter
Top Products
TP-6200 10/12126 Section 2 Operation
Local Programming Mode On
Menu 13—Communications, continued
Menu 13 Displays with Key Entries
Key
Entry Display Description
Confirms the entry.
CONNECTION TYPE →
(USER DEFINED) YES
PRIMARY PORT →
(USER DEFINED) Y/N
Displays the user-defined primary port subheading. Press the Down
arrow key if the correct primary port type is displayed. If the desired
primary port type is not displayed, press the Right arrow key until the
desired primary port type appears.
Press the Enter key.
CONNECTION TYPE →
(USER DEFINED) YES
ADDRESS ?
(LAN Connections)
Displays the LAN connection address number. Use the numeric keys
to enter the desired address 1--128. Use one address number per
unit and use consecutive numbers. Individual addresses are
necessary for the software to call up the desired unit.
SYSTEM ID ?
(Remote Connections)
Displays the system ID request. Use the numeric keys to enter the
required system ID of remote connections. The system ID is a
password. The user must use the same password for all devices at a
site.
BAUD RATE →
(USER DEFINED) Y/N
Displays the user-defined baud rate selection. Press the Down arrow
key if the correct baud rate is displayed. If the desired baud rate is
not displayed, press the Right arrow key until the desired baud rate
appears.
BAUD RATES
1200 Y/N
2400 N/Y
9600 N/Y
Entering YES selects the baud rate shown. Note: Selecting one
baud rate deselects any previously selected choice.
Confirms the entry.
Press the Enter key.
PRIMARY PORT →
(USER DEFINED) YES
PRIMARY PORT →
(USER DEFINED) YES
Confirms the entry.
ADDRESS #
(LAN Connections)
Confirms the entry.
SYSTEM ID #
(Remote Connections)
Entering YES selects the primary port shown. Note: Selecting one
primary port deselects any previously selected choice.
PRIMARY PORTS
RS-232 Y/N
RS-485 ISO 1 N/Y
Displays the user-defined connection type. Press the Down arrow
key if the correct connection type is displayed. If the desired
connection type is not displayed, press the Right arrow key until the
desired connection type appears.
CONNECTION TYPE →
(USER DEFINED) Y/N
CONNECTION TYPES
LOCAL SINGLE Y/N
LOCAL LAN N/Y
LOCAL LAN CONV N/Y
REMOTE SINGLE N/Y
REMOTE LAN N/Y
REMOTE LAN CONV N/Y
Entering YES selects the connection type shown. Note: Selecting
one connection type deselects any previously selected choice.