Kohler 20-3250 kW Portable Generator User Manual


 
TP-6200 10/12 Appendix 209
Appendix E Inputs and System Events by Application
The controller inputs and system events are typically
driven by the engine manufacturer’s ECM. NFPA 110
guidelines provide s pecific requirements that all
controllers must have for compliance. While the
controller displays all NFPA 110 required data, some
engine ECMs provide additional items that the controller
will display. The following table illustrates the available
alternator and engine outputs for monitoring and factory
reserved connections.
Controller Inputs and System Events
NFPA 110
Applications
Paralleling
Applications
DD/MTU Engines
with MDEC/ADEC
Waukesha
Engines
125RZG
AC Sensing Loss Warning
Air Damper Control (if engine equipped) X
Air Damper Indicator Shutdown (see D20) (if engine
equipped)
X
Air/Fuel Module Engine Start Delay X
Air/Fuel Module Remote Start X
Air/Fuel Module Shutdown (see D11) X
Alternator Protection Shutdown
Analog Aux. Input 0 Local Battery VDC
Analog Aux. Inputs A01--A07 (Warning or Shutdown)
Analog Aux. Input A01 Coolant Temperature (non-ECM)
Analog Aux. Input A02 Oil Pressure (non-ECM)
Analog Aux. Input A03 Intake Air Temperature X
Analog Aux. Input A04 Fuel Level
Analog Aux. Input A04 Oil Temperature Warning X
Analog Aux. Input A06 VSG (Volvo, GM, Doosan only)
Analog Aux. Input A07 Analog Volt Adjust
Battery Charger Fault Warning (see D01) X
Battle Switch Warning
Block Heater Control X
Breaker Closed Warning (see D05) X
Breaker Trip Warning X
Common Protective Relay Warning X
Critical Overvoltage Shutdown
Cyclic Cranking
Defined Common Faults (Warning or Shutdown)
Detonation Shutdown (see D13) X
Detonation Warning (see D12) X
Digital Aux. Inputs D01--D21 (Warning or Shutdown)
Digital Aux. Input D01 Battery Charger Fault Warning X
Digital Aux. Input D02 Low Fuel (Level or Pressure) Warning X
Digital Aux. Input D03 Low Coolant Temperature Warning X
Digital Aux. Input D04 Field Overvoltage Shutdown
Digital Aux. Input D05 Breaker Closed Warning X
Digital Aux. Input D06 Enable Synch X
Digital Aux. Input D09 Low Fuel Pressure Shutdown X
Digital Aux. Input D11 Air/Fuel Module (AFM) Shutdown X
Digital Aux. Input D12 Detonation Warning X
Digital Aux. Input D13 Detonation Shutdown X
Digital Aux. Input D13 Knock Shutdown X
Digital Aux. Input D14 Low Coolant Level Warning X
Digital Aux. Input D15 Remote Shutdown
Digital Aux. Input D16 Remote Reset