Filter
Top Products
TP-6200 10/1282 Section 2 Operation
Local Programming Mode On
Menu 2—Engine Monitoring, continued
Menu 2 Displays with Key Entries
Key
Entry Display Description
Displays the engine fuel subheading.
ENGINE FUEL →
ENGINE MONITORING →
DETAILED
Displays the detailed engine monitoring heading.
Note: The detailed engine monitoring feature requires a
DDC/MTU MDEC/ADEC-equipped engine.
(MDEC-Equipped Engines only)
Displays the engine oil subheading.
ENGINE OIL →
ENGINE FUEL →
Displays the engine fuel subheading.
ENGINE MONITORING →
DETAILED
Returns the user to the detailed engine monitoring heading.
Displays the amount of fuel used during the last 24 hours.
DAILY FUEL USED * # GAL
FUEL RATE * # GPH
Displays the fuel rate per hour.
FUEL PRES # PSI
FUEL TEMP # F
Displays the fuel pressure and fuel temperature.
CHG AIR PRESSURE # PSI
CHG AIR TEMP # F
Displays the turbocharger air pressure and temperature.
Displays the amount of fuel used since the last reset.
TOTALFUELUSED* #GAL
OIL PRES # PSI
OILTEMP #F
Displays the oil pressure and oil temperature.
ENGINE MISC →
Displays the miscellaneous engine subheading.
Returns the user to engine oil subheading.
ENGINE OIL →
ECU SUPPLY VDC #
AMBIENT TEMP # F
ECU HOURS #
ECU FAULT CODES #
Displays the engine ECU supply VDC and ambient temperature.
Displays the ECU operating hours.
Displays the ECU fault codes.
ENGINE MISC →
Returns the user to the miscellaneous engine subheading.
* While these menu displays do appear on the 550 controller, the engine ECM is not currently set up to provide this data.