Filter
Top Products
TP-6200 10/12 61Section 2 Operation
2.7.8 Menu 8—Time Delays
Menu 8 displays the cyclic cranking cycles, various
engine related starting and shutdown features, and
auxiliary shutdown and inhibit time delays.
The user must enable the programming mode to edit the
display.
See Section 2.8.8 to change settings in this menu.
Cooldown Temperature Override. This feature allows
the user to bypass (override) the temperature-based
cooldown. When this feature is enabled, the engine will
run in cooldown mode for the entire time defined as
TIME DELAY ENG COOLDOWN, regardless o f engine
temperature.
If the Cooldown Temperature Override is not enabled,
the unit will cease to run when the engine temperature
falls below the ENGINE COOLED DOWN temperature
(shown in Menu 2).
Engine cooldown and this cooldown temperature
override feature apply to remote shutdown when the
master switch is in the AUTO position. No cooldown will
occur when the master switch is moved to the OFF
position.
MENU 8
TIME DELAYS
TIME DELAY MIN:SEC
ENGINE START ??:??
TIME DELAY MIN:SEC
STARTING AID ??:??
TIME DELAY MIN:SEC
CRANK ON ??:??
TIME DELAY MIN:SEC
CRANK PAUSE ??:??
TIME DELAY MIN:SEC
ENG COOLDOWN ??:??
OVERCRANK SHUTDOWN
CRANK CYCLES ?
TIME DELAY MIN:SEC
OVERVOLTAGE ??:??
TIME DELAY MIN:SEC
UNDERVOLTAGE ??:??
Menu 8 Overview
TIME DELAY MIN:SEC
LOAD SHED KW ??:??
COOLDOWN TEMPERATURE
OVERRIDE Y/N