TP-6200 10/12 43Section 2 Operation
Menu List Summary (Legend: D First level submenu, d second level submenu)
Engine Monitoring
Detailed (MDEC/ADEC
equipped engines only)
Engine Fuel
D Fuel Pressure
Fuel Temperature
D Charge Air Pressure
Charge Air Temperature
D Fuel Rate
D Daily Fuel Used
D Total Fuel Used
Engine Oil
D Oil Pressure
Oil Temperature
Engine Misc
D ECU Supply VDC
Ambient Temperature
D ECU Hours
D ECU Fault Codes
Menu 3
Analog Monitoring
D Local Batt VDC
D Analog 01 to 07 (user-
defined descriptions)
(Scroll through 7 user-
defined descriptions. See
Figure 2-8 in User Inputs
for factory-reserved inputs
that are not user-
selectable.)
Non-ECM Engines
D A03--A07 User-Defined
ECM Engines
D A01 Coolant Temperature
D A02 Oil Pressure
D A03--A07 User-Defined
D A06 VSG (Doosan, GM,
Volvo only)
Waukesha Engines
D A05--A07 User-Defined
Menu 1
Generator Monitoring
Menu 2
Engine Monitoring
Volts & Amps
D L1-L2 Volts
L1 Amps
D L2-L3 Volts
L2 Amps (3 phase)
D L3-L1 Volts
L3 Amps (3 phase)
D L1-L2 Volts
L2 Amps (1 phase)
D L1-L0 Volts
L1 Amps
D L2-L0 Volts
L2 Amps
D L3-L0 Volts
L3 Amps (3 phase)
D Frequency
V&ASummary
D V L1-L2, L2 -L3, L3-L1
(3 phase)
D V L1-L0, L2 -L0, L3-L0
(3 phase)
D A L1, L2, L3 (3 phase)
D V L1-L2, L1 -L0, L2-L0
(1 phase)
D A L1, L2 (1 phase)
Power kW
D Tota l kW
Power Factor
D L1 kW
Power Factor
D L2 kW
Power Factor
D L3 kW
Power Factor (3 phase)
D Tota l kW
% of Rated kW
Power kVAR
D Tota l kVAR
Absorbing/Generating
D L1 kVAR
Absorbing/Generating
D L2 kVAR
Absorbing/Generating
D L3 kVAR
Absorbing/Generating
(3 phase)
Power kVA
D Tota l kVA
D L1 kVA
D L2 kVA
D L3 kVA (3 phase)
Engine Monitoring Basic
D Oil Pressure
Coolant Temperature
D Intake Air Temperature
Oil Temperature
(DDC/MTU engine with
MDEC/ADEC and
Waukesha engine only)
D Engine RPM
Local Battery VDC
D High Coolant
Temperature Shutdown
and Warning Setpoints
D Low Oil Pressure
Shutdown and Warning
Setpoints
D Engine Warmup
Temperature Setpoint
D Engine Cooldown
Temperature Setpoint
Engine Monitoring
Detailed (DDEC/JDEC/
EMS2/EDC3 equipped
engines only)
Engine Fuel
D Fuel Pressure
Fuel Temperature
D Charge Air Pressure
Charge Air Temperature
D Fuel Rate
D Used Last Run
Engine Coolant
D Coolant Pressure
Coolant Temperature
D Coolant Level
Engine Oil
D Oil Pressure
Oil Temperature
D Oil Level
Crankcase Pressure
Engine Misc
D ECM Battery VDC
Ambient Temperature
D Engine Model No.
D Engine Serial No.
D Unit No.
ECM S/N
D ECM Fault Codes
Menu 2
Engine Monitoring, cont.
Menu 4
Operational Records
D Factory Test Date
D Tota l Run Time
D Tota l Run Time
Loaded Hours
D Tota l Run Time
Unloaded Hours
D Tota l Run Time
kW Hours
D No. of Starts
D Engine Start Countdown
d Run Time
D Records-Maintenance
d Reset Records
D Run Time Since Maintenan
c
Total Hours
D Run Time Since Maintenan
c
Loaded Hours
D Run Time Since Maintenan
c
Unloaded Hours
D Run Time Since Maintenan
c
kW Hours
D Operating Days
Last Maintenance
D No. of Starts
Last Maintenance
D Last Start
Date
D Length of Run
(Un)loaded Hours
Menu 5
Event History
D (Message Text)
D (Scroll through up to 100
stored events)
Menu 6
Time and Date
D Time 00:00 AM/PM
D Date