TP-6200 10/12130 Section 2 Operation
Local Programming Mode On
Menu 14—Programming Mode, continued
Menu 14 Displays with Key Entries
Displays the user-defined programming mode. Press the Down
arrow key if the correct programming mode is displayed. If the
desired programming mode is not displayed, press the Right arrow
key until the desired programming mode appears.
Key
Entry Display Description
Input a menu number.
MENU 14
PROGRAMMING MODE
PROGRAMMING MODE →
(USER DEFINED) Y/N
PROGRAMMING MODE
ENTER OLD CODE *
PROGRAMMING MODE →
CHANGE ACCESS CODE
Displays the programming mode and changes the access code.
Press the Down arrow key if you do not wish to change the access
code. To change the access code, press the Right arrow key.
Enter the old access code and press the Enter key.
PROGRAMMING MODES
OFF Y/N
LOCAL N/Y
REMOTE N/Y
Entering YES selects the programming mode shown.
Note: Selecting one programming mode deselects any previously
selected choice.
Changing the programming mode requires entering the access code.
Enter the access code and press the Enter key.
Note: The factory default access code is the number 0.
Press the Enter key.
PROGRAMMING MODE →
(USER DEFINED) YES
PROGRAMMING MODE
ENTER CODE *
Confirms the entry.
PROGRAMMING MODE →
(USER DEFINED) YES
Enter the new access code and press the Enter key.
PROGRAMMING MODE
ENTER NEW CODE *
Confirms the entry.
MENU 14
PROGRAMMING MODE
Returns the user to the programming mode heading.
PROGRAMMING MODE →
CHANGE ACCESS CODE
MAIN MENU NUMBER 14
ENTER MENU NO. 1--15
Press the Enter key.
Displays the menu number and name.