Table of Contents, continued
TP-6200 10/12Table of Contents4
2.7.13 Menu 13—Communications 68....................................
2.7.14 Menu 14—Programming Mode 69..................................
2.7.15 Menu 15—Protective Relays (PR) 70...............................
2.7.16 Menu 20—Factory Setup (Version 2.10) 71..........................
2.7.17 Menu 20—Factory Setup (Version 2.21) 72..........................
2.8 Local Programming Mode On 74...........................................
2.8.1 Menu 1—Generator Monitoring 75..................................
2.8.2 Menu 2—Engine Monitoring 79....................................
2.8.3 Menu 3—Analog Monitoring 83....................................
2.8.4 Menu 4—Operational Records 86..................................
2.8.5 Menu 5—Event History 88.........................................
2.8.6 Menu 6—Time and Date 89.......................................
2.8.7 Menu 7—Generator System 90....................................
2.8.8 Menu 8—Time Delays 96.........................................
2.8.9 Menu 9—Input Setup 98..........................................
2.8.10 Menu 10—Output Setup 104........................................
2.8.11 Menu 11—Voltage Regulator 114....................................
2.8.12 Menu 12—Calibration 120..........................................
2.8.13 Menu 13—Communications 125....................................
2.8.14 Menu 14—Programming Mode 129..................................
2.8.15 Menu 15—Protective Relays (PR) 131...............................
2.8.16 Menu 20—Factory Setup 135.......................................
Section 3 Scheduled Maintenance 137..........................................................
3.1 Alternator Service 137.....................................................
3.2 Engine Service 137.......................................................
3.3 Service Schedule 138.....................................................
3.4 Alternator Bearing Service 140..............................................
3.4.1 20--300 kW Models 140............................................
3.4.2 300--2250 kW Models with Single-Bearing Alternator 140...............
3.4.3 1250 kW and Larger Models with Two-Bearing Alternator 140...........
3.5 Diesel Fuel Systems 140...................................................
3.5.1 Bleeding Air from Fuel System 140..................................
3.5.2 Subbase Fuel Day Tank Electronic Control Module (ECM) 141..........
3.5.3 Subbase Inner Fuel Tank Alarm 142.................................
3.6 Gas Fuel Systems (REZG_ and REZX_/RZX_ models) 142.....................
3.6.1 Gas Fuel System Concept (Single Fuel) 142..........................
3.6.2 LPG Liquid Withdrawal Fuel System Concept 142.....................
3.6.3 Natural Gas and LPG Conversion 143...............................
3.6.4 Fuel System Changeover Kits (Dual Fuel) 143........................
3.6.5 Crankcase Ventilation (CCV) Heater Kit GM78171-KP1
(125/150REZG models) 145........................................
3.7 Cooling System 145.......................................................
3.7.1 Coolant Level Check 145...........................................
3.7.2 Cooling System Component Inspection 146...........................
3.7.3 Procedure to Drain Cooling S ystem 146..............................
3.7.4 Procedure to Flush and Clean Cooling System 146....................
3.7.5 Procedure to Refill Cooling System 146..............................
3.8 Radiator Fan Bolt Retorque 147.............................................
3.9 Radiator Expansion Joint Loosening—Initial S etup Only 148....................
3.10 Radiator Fan Bearing Lubrication 148........................................
3.11 Battery 149
...............................................................
3.11.1 Clean Battery 149.................................................
3.11.2 Electrolyte Level Inspection 150.....................................
3.11.3 Specific Gravity Check 151.........................................
3.11.4 Charge Battery 151................................................