Filter
Top Products
Entering a New Power Level
Press Edit L1 [XL1] to open the power level parame
-
ter, then enter the new power level using the keypad
and appropriate termination soft-key.
To close the open power level parameter, press
Edit L1 or make another menu selection.
Selecting a Preset Power Level
To select one of the preset power levels for output,
press Level Control > . The Level Control menu
(below) is displayed.
This menu lets you perform the following:
q
Select one of the preset power levels L0 [L0], L1
[L1], L2 [L2], L3 [L3],orL4 [L4] for output
q
Edit each preset power level
q
Access the Level List menu (to tag, edit, or out
-
put a power level from the list)
q
Select a tagged power level from the Level List
for output using the Scan Up or Scan Down
keys
q
Select Logarithmic or Linear units
Press Units> [LOG/LIN] to display the Units menu
(left) and to select the power level units. When Log
is selected, units are dBm or dBmV; when Linear is
selected, units are mV. The units are displayed with
the indicated power level to reflect your selection.
Press < Previous to return to the Level menu dis
-
play.
3-52 MG369XB OM
Fixed Power Level Operation Local (Front Panel) Operation