Filter
Top Products
Next, press the System main menu key. At the
System menu display, press Config | Rear Panel >
to access the rear panel Configuration menu (be
-
low).
Press the External Ref BW > soft key to access the
bandwidth selections (below).
After selecting the external reference loop band
-
width, the setting is shown in the Configure Rear
Panel menu.
Press < Previous | < Previous to return to the Sys
-
tem menu display.
NOTE
MG369XB phase noise specifications apply
only when an external reference is not con
-
nected.
MG369XB OM 3-91
Local (Front Panel) Operation Reference Loop Adjustments