Press More > to access the additional Internal
Pulse Status menu display (with Option 26, below
left; with Option 24, below right).
This menu allows you to perform the following:
q
Access the Pulse Mode menu
q
Access the Trigger Mode menu
q
Configure the internal pulse display
(Period or PRF)
q
Select the polarity of the pulse input signal
(Low or High) that turns on the RF
q
Select the pulse generator’s clock rate
Press Mode... to access the Pulse Mode menu dis-
play (below).
This menu displays the pulse modes (Single, Dou
-
blet, Triplet, and Quadruplet) that are available
from the pulse generator. Use the cursor control
keys to highlight the desired pulse mode, then select
it by pressing Select . The Internal Pulse Status
display will reflect your selection.
Press < Previous to return to the additional Inter
-
nal Pulse Status menu display.
MG369XB OM 3-109
Local (Front Panel) Operation Signal Modulation
