Filter
Top Products
Editing the Current Frequency
Press Edit F1 [F1] to open the frequency parameter,
then edit the current CW frequency using the cursor
control keys or the rotary data knob. To close the
open frequency parameter, press Edit F1 or make
another menu selection.
Entering a New Frequency
Press Edit F1 [F1] to open the frequency parameter,
then enter the new CW frequency using the keypad
and appropriate terminator key. To close the open
frequency parameter, press Edit F1 or make an
-
other menu selection.
Selecting a Preset Frequency
To select one of the preset frequencies for output,
press the soft-key Frequency Control > . The CW
Frequency Control menu, shown below, is displayed.
This menu lets you perform the following:
q
Select preset frequencies F0 [CF0], F1 [CF1], F2
[CF2], M1 [CM1],orM2 [CM2] for output
q
Edit each preset frequency
q
Access the Frequency List menu (to tag, edit,
or output a frequency from the list)
q
Select a tagged frequency from the frequency
list (tagging is described below) for output us
-
ing the Scan Up or Scan Down keys
q
Select an output power level for the CW fre
-
quency
Press < Previous to return to the CW menu display.
MG369XB OM 3-21
Local (Front Panel) Operation CW Frequency Operation