Filter
Top Products
Step 3. Select SOURCE, then SOURCE AD
-
DRESS.
Step 4. Enter 5 on the keypad, then press the
dB/GHz termination key.
The 8003 will search for a source at address five
(The default GPIB address of the series MG369XB
signal generators is five). When the 8003 has prop
-
erly identified the MG369XB, the message “Initial
-
izing W6700” will be displayed on the 8003 CRT
screen. (The MG369XB emulates the Anritsu 6700B
Swept Frequency Synthesizer GPIB command
codes.)
7-14 MG369XB OM
Use with a 8003 Scalar Network Analyzer Use With Other Instruments