Filter
Top Products
3-17 Internal Power
Meter (Option 8)
The internal power meter function, added by Option 8, lets you mea
-
sure the power from a test device and display its value in the lower
right corner of the level parameters area of the front panel LCD. The
power measurement function has a range of +16 dBm to –35 dBm and
is compatible with Anritsu 560-7, 5400-71, and 6400-71 series detec
-
tors.
To make a measurement of the power from a test
device using the internal power measurement func
-
tion, first connect the detector to the test device and
to the rear panel POWER METER connector.
Next, press the SYSTEM key. At the System menu
(below), press Measure Power to enable the power
measurement function.
During operation, the power level is displayed near
the Level parameter in all main menu displays (be
-
low).
If the power level exceeds the operating limitations
of the instrument or RF detector, the word Pwr
Underrange is displayed to indicate an under range
condition; the word Pwr Overrange is displayed to in
-
dicate an over range condition.
3-116 MG369XB OM
Internal Power Meter (Option 8) Local (Front Panel) Operation