Filter
Top Products
The Configure GPIB menu (below) is displayed.
Press GPIB Address to change the address of the
MG369XB on the bus. Enter 19 using the cursor
control keys or the data entry keypad and the termi
-
nator key
Hz
ns
ADRS
The new GPIB address (19) will appear on the dis-
play.
Press More > to access the First Additional Config-
ure GPIB menu (below).
At this menu, toggle the Display Updates between
On or Off depending upon your preference. Fastest
measurement results are obtained when Display
Updates are Off.
Use With Other Instruments Use with a HP8757D Scalar Network Analyzer
MG369XB OM 7-17
NOTE
For the MG369XB, Display
Updates must be On when using
the HP8757D emulation mode.