Filter
Top Products
Press Slope On/Off [SL1] to activate the ALC power
slope function.
Press Edit Pivot [PVT] to open the pivot point fre
-
quency parameter for editing. Edit the current fre
-
quency using the cursor control keys, rotary data
knob, or enter a new value using the keypad and ap
-
propriate termination key. When you have finished
setting the open parameter, close it by pressing
Edit Pivot or by making another menu selection.
Press Edit Slope [SLP] to open the slope parameter
for editing. Edit the current slope value using the
cursor control keys, rotary data knob, or enter a new
value using the key pad. When you have finished
setting the open parameter, close it by pressing
Edit Slope or by making another menu selection.
While monitoring the power level at the device-un
-
der-test (DUT), adjust the power slope and pivot
point to level the power at the DUT.
Press Slope On/Off [SL0] again to deactivate the
ALC power slope function.
MG369XB OM 3-69
Local (Front Panel) Operation Leveling Operations
SLOPE
When Power Slope is selected ON,
this status message is displayed on
all menu displays to remind you
that a power slope correction has
been applied to the ALC.