Filter
Top Products
This menu lets you perform the following:
q
Select a sweep range
q
Set the sweep time
q
Access the Trigger menu
q
Select an output power level for the sweep
q
Access the Alternate Sweep menu
Setting Sweep
Time
To set the analog sweep time, from the Analog
Sweep menu, press Sweep Time [SWT].
Edit the current sweep time using the cursor control
keys, the rotary data knob, or enter a new sweep
time using the key pad and appropriate termination
key. To close the open sweep time parameter once
you have set the desired sweep time, press
Sweep Time or make another menu selection.
To access the Analog Sweep Trigger menu from this
menu, press Trigger > . From the Trigger menu, you
can select one of three trigger modes:
q
Auto
q
External
q
Single
The trigger modes are described on page 3-31.
To access the Alternate Sweep menu, press
Alternate Sweep > . The Alternate Sweep modes are
described on page 3-38.
Press < Previous to return to the Analog Sweep
menu display.
MG369XB OM 3-27
Local (Front Panel) Operation Sweep Frequency Operation