Filter
Top Products
Frequency List—To access the Frequency List
menu (below), press Frequency List... from the Fre
-
quency Control menu. This menu lets you tag, edit,
or output a frequency from the list.
Use the cursor control keys to select a frequency
from the frequency list. The selected frequency is
highlighted in reverse video and displayed in full be-
low the frequency list.
Press Tag Selected to tag a selected frequency
(places an F in front of the tagged frequency). If the
frequency is already tagged, pressing Tag Selected
will un-tag the frequency (remove the F). Tagging
selected frequencies lets you quickly switch between
them using the scan soft-keys of the CW Frequency
Control menu.
Press Edit Selected to edit the selected frequency or
enter a new frequency.
Press Output Frequency to output the selected fre
-
quency. On the frequency list, the output frequency
selection is marked by (a black square) or, if
tagged, an F (highlighted in reverse video). This
frequency is output until you select another fre
-
quency from the list and press Output Frequency .
Return to the CW Frequency Control menu display
by pressing < Previous .
Selecting a
Power Level
While in the CW frequency mode, you can edit the
current CW frequency output power level or enter a
new output power level.
3-22 MG369XB OM
CW Frequency Operation Local (Front Panel) Operation