Filter
Top Products
Selecting an Alternate Sweep Range
Press Alternate Range > to access the Alternate
Range menu display (below).
Select the alternate sweep range (Full [AFU], F1-F2
[AF1], F3-F4 [AF3], F5-dF [AD5],orF6-dF [AD6]). The
menu then displays the current frequency parame
-
ters for the selected sweep range. If you wish to
change a frequency parameter, use the menu edit
soft-key to open the parameter, then edit it.
When you are done selecting the alternate sweep
range, press < Previous to return to the Alternate
Sweep menu display.
3-40 MG369XB OM
Sweep Frequency Operation Local (Front Panel) Operation