Filter
Top Products
Phase Offset When active, the MG369XB's RF output will be
phase shifted by the specified amount displayed in
the phase offset parameter. The phase offset range
is -360° to +360° with a resolution of 0.1°.
NOTE
The phase offset function is available in CW op
-
erating mode only.
To activate the phase offset from the CW menu,
press Phase Offset> to access the Phase Offset
menu (below) and press Phase Offset [PS1].
To turn off the phase offset, press Phase Offset .
[PS0] from the phase offset menu.
To edit the phase offset value, press Edit Offset
[PSO] button from the phase offset menu (below),
then use the cursor keys or rotary knob to edit the
phase offset or use the keypad to enter a new value.
Press Edit Offset to close the open parameter.
3-24 MG369XB OM
CW Frequency Operation Local (Front Panel) Operation