Filter
Top Products
A message showing the sweep trigger mode selected
appears on the right side of frequency title bar.
If you select the single sweep trigger mode, the
menu display adds the menu soft-key Trigger .
Pressing Trigger [TRG] starts a single sweep. If a
single sweep is in progress, pressing
Trigger [RSS] causes the sweep to abort and reset.
Press < Previous to return to the Sweep menu dis
-
play.
NOTE
With Auto trigger selected and the dwell-time-
per-step set to a small value, display updating
slows down. This ensures that the sweep speed
is not adversely affected. Because of this poten
-
tial display update slow down, when leaving
List Sweep mode with Auto trigger selected for
another mode, Auto trigger is automatically
turned off and Manual trigger is selected.Thus,
when List Sweep mode is entered, the display
updating will be back to normal speed.
3-50 MG369XB OM
Sweep Frequency Operation Local (Front Panel) Operation