Filter
Top Products
To output markers during a sweep you must first se
-
lect (tag) the marker frequencies from the Marker
List menu, then turn on the marker output.
To access the Marker List menu from a sweep fre
-
quency menu, press Frequency Control > . The
Sweep Frequency Control menu (below) is dis
-
played.
Now press the menu soft-key Marker List... . The
Marker List menu (below) is displayed.
This menu lets you tag or edit marker list frequen
-
cies and turn the markers on/off.
Use the cursor control keys to select a frequency pa
-
rameter from the marker list. The selected fre
-
quency parameter is highlighted in reverse video
and displayed in full below the marker list.
Editing a Marker List Frequency
If you want to change a selected marker list fre
-
quency parameter's value, press Edit Selected to
open the frequency parameter, then edit the current
frequency or enter a new frequency.
MG369XB OM 3-37
Local (Front Panel) Operation Sweep Frequency Operation