Filter
Top Products
Menu Display
Format
The menu display is divided into specific areas that
show the frequency and power level information for
the current signal generator setup. Menu labels for
the current menu's soft-keys appear along the
bottom and right side of the display.
Title Bars
A shaded title bar identifies each parameter area.
Operation mode information is displayed on the title
bars.
q
Frequency Mode Title Bar—The current
frequency mode (CW, Step Sweep, Manual
Sweep, or List Sweep) appears on the left side
of the bar. In the step and list sweep mode, the
type of sweep trigger appears on the right side
q
Level Mode Title Bar—The current power
level mode (Level or Level Sweep) appears on
the left side of the bar. In a level sweep mode,
the type of sweep trigger appears on the right
side of the bar
q
Modulation Title Bars—Each type of signal
modulation (AM, FM/FM, and Pulse) has a
separate title bar on the display
Parameter Areas
The parameter areas show the frequency and power
level information for the current MG369XB setup.
q
Frequency Parameters Area—The current
CW frequency in GHz, the start and stop fre
-
quencies of the current frequency sweep range
in GHz, the current list index and frequency, or
the start and stop indexes for the list sweep
are displayed in this area
q
Power Level Parameters Area—The cur
-
rent power level in dBm or mV, or the start
and stop levels of the current power level
sweep range in dBm or mV are displayed in
this area
q
Modulation Status Areas—This area dis
-
plays the modulation status for the current
setup
MG369XB OM 3-9
Local (Front Panel) Operation Data Display Area