Filter
Top Products
Tutorials
2-50
AWG610 Arbitrary Waveform Generator User Manual
Do the following steps to set the year:
1. Repeatedly press the b button in the upper middle part of the front panel
until the Year: field is highlighted on the screen.
2. Turn the general purpose knob in the right upper corner of the front panel,
clockwise or counterclockwise until the word year is displayed.
When using the general purpose knob, note that the current displayed year in
the Year: field, is displayed in the upper right corner of the screen, together
with the icon knob. This means that you can adjust the value using the
general purpose knob.
Do the following steps to set the month and day:
1. Press the b button once to highlight the Month:.
2. Use the general purpose knob to set the month.
3. Set the date in the Day: as was done in step 1 and 2 above.
4. Using the b button and the general purpose knob, set the hour, minute and
second in the Hour:, Min: and Sec:, respectively, as were done in step 1
above.
Do the following steps to adjust the screen brightness:
1. Repeatedly press the b button until the Brightness Level: is highlighted.
2. Turn the general purpose knob clockwise or counterclockwise while looking
at the screen until you get the most suitable brightness for you.
The changes made during this tutorial take effect immediately. You can display
the system utility screen and adjust the screen brightness at any time without
exiting current tasks.
You have completed the Instrument Setup tutorial.
Set the Date and Time
Adjust Screen Brightness