Filter
Top Products
The Equation Editor
AWG610 Arbitrary Waveform Generator User Manual
3-107
NOTE. You can also use the TOGGLE button to toggle the text selection mode to
on and off.
Highlight area is the
one currently selected.
You can cut or copy
this area.
Figure 3-24: Text selection (example)
The Paste command inserts the paste buffer text starting at the caret position.
You must have copied or cut text prior to using the Paste command.
Do the following steps to cut or copy text from the edit area:
1. Select the text to cut or copy. Refer to Selecting Text on page 3–106.
2. Push the Cut side button to delete the selected text from the edit area and
place it in the paste buffer from the selection range.
3. Push the Copy side button to copy the selected text from the edit area and
place it in the paste buffer.
The text is unselected after completing the copy operation.
Cutting, Copying, and
Pasting Text