Filter
Top Products
Menu Structures
3-8
AWG610 Arbitrary Waveform Generator User Manual
SETUP (cont.)
Main
menu
Bottom
menu
Side
menu
Subbottom
menu
Subside
menu
PopĆup or
dialog menu
Description
Vertical
Filter
{Through 20 MHz 50 MHz 100 MHz 200 MHz Through}
Adjusts vertical axis parameters
Marker 1 High Level (-1.1 to 3.0V)
(-1.0 V to +1.0V)Offset
Marker...
Marker 1 Low Level (-1.1 to 3.0V)
Marker 2 High Level (-1.1 to 3.0V)
Marker 2 Low Level (-1.1 to 3.0V)
Previous menu
Horizontal
Clock (50 kS/s to 2.6 GS/s)
Clock Ref {Internal | External}
Marker 1 Delay (0 to 1.5 ns)
Marker 2 Delay (0 to 1.5 ns)
Adjusts horizontal parameters
Output {Normal | Direct}
Run Mode
Continuous
Triggered
Gated
Enhanced
Source {External | Internal}
Slope (or Polarity) {Positive | Negative}
Level (-5.0 to 5.0 V)
Impedance {50 Ohm|1kOhm}
Interval (1.0 µs to 10.0s)
Not used
Save/Restore
Trigger
Save Setup
Restore Setup
Selects run mode
Sets trigger parameters
Saves/restores current settings
Note: Use the General Purpose Knob to select.
Amplitude
(0.100 V
pĆp
to 2.000 V
pĆp
)
Note: Press the Front Panel Edit button repeatedly to return to the Edit Main menu.