Filter
Top Products
The APPL Window
3-128
AWG610 Arbitrary Waveform Generator User Manual
7. If needed, you can repeat adjusting the superpose parameters in this screen
and generate new output waveform.
8. Select Superpose (bottom)!Save... (side) to save the generated waveform
to a file.
The specified pattern (.PAT) or waveform (.WFM) file is used as input data.
When a pattern data file is specified for input, the application reads only the
MSB bits (DATA7). When a waveform file is specified, this process converts the
values equal to or greater than 0.5 to a logic 1, and the values less than 0.5 to a
logic 0.
NOTE. One restriction is applied to the number of input data points;
input data points > isolated pulse data points / (Samples/Cell)
The pre-defined patterns shown in Table 3–35 are incorporated in the applica-
tion:
Table 3-35: PreĆdefined patterns
Pattern items Descriptions
X^15+X+1 15Ćbit MĆseries pseudo random pulse
X^9+X^5+1 9Ćbit MĆseries pseudo random pulse
X^7+X^3+1 7Ćbit MĆseries pseudo random pulse
32'1's 32Ćbit wide data in which all bits are set to 1
Harmonic Elimination Pattern The pattern's 5th harmonic component is set to 0.
110000001000000110000001000000
Input data