Tutorials
2-80
AWG610 Arbitrary Waveform Generator User Manual
Line 1 of mainseq.seq calls the subsequence file as soon as it detects a
trigger event. The subsequence list outputs the four waveforms and then
returns to line 2 of the main sequence.
Line 2 continuously outputs the ramp waveform while waiting for an event
signal. You will supply an event signal in the next step.
4. Push the FORCE EVENT button on the front panel.
This causes the sequence to jump to line 3. When line 3 completes output of
the triangle waveform, it goes back to the line 1 and starts the output process
over again. So, line 1 to 3 loops and the main sequence file does not
terminate unless you push the FORCE EVENT button.
You have completed the Creating and Running Waveform Sequences tutorial.
Refer to the Reference section beginning on page 3–1 for detailed information on
all instrument functions.