Filter
Top Products
The APPL Window
3-134
AWG610 Arbitrary Waveform Generator User Manual
Network Application
This application creates a network test signal to analyze the various standard
network signals.
The signals are created using the following process:
H Input binary bit pattern expressed by 0 and 1.
H Convert the input pattern using the standard-defined code and estimate the
positions where pulse will be generated and its polarity.
H Superpose a standard-defined isolated pulse in the position estimated above.
Input data
Code
Conversion
Isolated pulse
Output
Figure 3-35: Outline flow for producing network test read signal
1. Select APPL (front-panel)!Application (bottom)!Network (side) to
display the Network Application screen. See Figure 3–36.
Figure 3-36: Network application initial screen
Operation Flow