Filter
Top Products
The Sequence Editor
AWG610 Arbitrary Waveform Generator User Manual
3-115
1. Move the cursor to the line you want to copy.
2. Push Line Edit (bottom)!Copy Line (side).
You can insert the paste buffer contents into the sequence table. Do the following
steps to paste a line:
1. Move the cursor to the line you want to insert the paste buffer contents.
2. Push Line Edit (bottom)!Paste Line (side).
The paste buffer contents are inserted at the selected table line. The contents
of the line at the point of insertion, and all subsequent lines, are shifted down
by one line.
NOTE. After pasting a new line in the table, the table automatically updates all
current and destination line numbers for jump operations.
Sequence Table Fields
Indicates the line number of each row of the sequence table. The instrument
automatically assigns line numbers as well as updates line numbers after editing
the sequence table.
Specify the names of the waveform files that are output to the CH1 cells. You
can mix and match .WFM, .SEQ, and .PAT files on a single sequence line.
NOTE. Remember that you can only nest sequence files one level. Also, the
sequence table cannot call itself as a subsequence.
To specify each file name, select it from the displayed file listing. You must not
use a drive or directory name. All waveform files and the sequence file must be
under the same directory.
You can also specify a sequence file.
Do the following steps to enter a waveform, pattern, or sequence file name:
1. Move the cursor to CH1.
2. Push Data Entry (bottom)!Enter Filename... (side).
3. The Select File dialog box appears.
Pasting a Line
Line
CH 1