Filter
Top Products
Capturing Waveforms
AWG610 Arbitrary Waveform Generator User Manual
3-173
The AWG610 Arbitrary Waveform Generator starts transferring the waveform
from the selected source instrument. The file transferred to the AWG610
Arbitrary Waveform Generator is automatically converted and saved in the file
specified in the column of the line you selected. If needed, change the file name
and perform another waveform data transfer.
Figure 3-58: Source instrument selection under Others...
About Transferred Files
When you capture a waveform from a selected instrument, the corresponding
waveform file is created in the current directory of the current drive. At the same
time, the set file is also created to save the setup information such as amplitude
and offset.
Use the set file to output the waveform file with the same settings as those
captured in the instrument.