Filter
Top Products
AWG610 Arbitrary Waveform Generator User Manual
A-1
Appendix A: Specifications
This section contains theAWG610 Arbitrary Waveform Generator specifications.
All specifications are guaranteed unless labeled “typical”. Typical specifications
are provided for your convenience but are not guaranteed.
Specifications that are marked with the
n symbol in the column Characteristics
are checked in Appendix B: Performance Verification and the page number
referenced to the corresponding performance verification procedures can be
found in the column PV reference page.
The characteristics in the specifications are listed in tables that are divided into
categories. In these tables, the subcategories may also appear in boldface under
the column Characteristics.
The performance limits in this specification are valid with these conditions:
H The AWG610 Arbitrary Waveform Generator must have been calibrated/ad-
justed at an ambient temperature between +20
_ C and +30_ C.
H The AWG610 Arbitrary Waveform Generator must be in an environment
with temperature, altitude, humidity, and vibration within the operating
limits described in these specifications.
H The AWG610 Arbitrary Waveform Generator must have had a warm-up
period of at least 20 minutes.
H The AWG610 Arbitrary Waveform Generator must be operating at an
ambient temperature between +10
_ C and +40_ C.
Warranted characteristics are described in terms of quantifiable performance
limits which are warranted.
Performance Conditions