The Graphical Waveform Editor
AWG610 Arbitrary Waveform Generator User Manual
3-53
3. Push the Marker 1 or Marker 2 side button to select the marker.
4. Push the Set Data side button to toggle between High and Low value.
5. Push the Exec side button to change the marker specified in Step 3 to the
value specified in Step 4 for the entire edit area.
The Horizontal Shift... command shifts the edit area data to the left or right by
the specified value (points or time), within the cursor area. A positive value
shifts data to the right, and a negative value shifts data to the left. All data that is
shifted past the left or right cursor is truncated. The opposite, blanked field is
padded with the initial cursor point values. This command can only shift one
type of data (waveform, Marker 1 or Marker 2) at a time.
Do the following steps to horizontally shift the waveform or the marker data:
1. Move the cursors to specify the edit area of data to shift.
2. Push Operation (bottom)!Horizontal Shift (pop-up)!OK (side).
3. Push the Data, Marker1, or Marker2 side button to select the data you
want to shift.
4. Push the Point (or Time) side button.
Use the general purpose knob or numeric keys to specify the amount of shift.
A positive value shifts data to the right, and a negative value shifts data to
the left.
5. Push the Exec side button to shift the part specified in step 3 by the amount
specified in step 4.
The Horizontal Rotate... command rotates the edit area data to the left or right by
the specified value (points or time), within the cursor area. A positive value
shifts data to the right, and a negative value shifts data to the left. All data that is
shifted past the left or right cursor is rotated to the opposite cursor. This
command can only shift one type of data (waveform, Marker 1 or Marker 2) at a
time.
Do the following steps to horizontally rotate waveform or marker data:
1. Move the cursors to specify the edit area to shift.
2. Push Operation (bottom)!Horizontal Rotate (pop-up)!OK (side).
3. Push the Data, Marker1, or Marker2 side button to select the data you
want to shift.
Horizontal Shift...
Horizontal Rotate...