Filter
Top Products
Tutorials
2-48
AWG610 Arbitrary Waveform Generator User Manual
AWG610 Arbitrary Waveform Generator TDSĆseries oscilloscope
50 W SMAĂcoaxial cable
SMA
(Fe)ĆBNC(Ma)Ă
adapter
CH 1
50 W SMA Terminator
Figure 2-30: Cable connection between AWG610 Arbitrary Waveform Generator
and digital storage oscilloscope
Before beginning the tutorials, confirm that the instrument is installed correctly.
Refer to Installation on page 1–7.
Push the ON/STBY button to power on the instrument. Refer to Power On on
page 1–12. The startup diagnostic routines will run and the instrument displays
an initial screen similar to that shown in Figure 2–31. You are now ready to
perform the tutorials.
Figure 2-31: Initial screen
If the instrument does not power on correctly or does not pass the power-on
diagnostics, contact the nearest Tektronix service center for help.