Filter
Top Products
Operating Basics
AWG610 Arbitrary Waveform Generator User Manual
2-31
The AWG610 Arbitrary Waveform Generator can open and edit up to three
waveform and/or pattern files, in any combination. The wave data is displayed in
separate windows, with each window stacked vertically on the screen. Multiple
editor windows are very useful for creating a new waveform by cutting and
pasting waveform data from other files. Figure 2–23 shows an example of three
opened editor windows (one pattern and two waveform files).
Figure 2-23: Multiple editor windows
NOTE. You cannot open a sequence, text, or equation file from within the
Waveform or Pattern Editor. If you are in the Waveform or Pattern Editor, you
must exit to the EDIT main main screen and then load the sequence, text, or
equation file.
Some editor information is not displayed when three Waveform editor windows
are open.
Opening Multiple Editor Windows. Do the following steps to load waveform data
file into an editor window:
1. From the editor screen, push File (bottom)!Open... (pop-up)!OK (side).
The Select File dialog box appears. If you cannot select the Open... menu
item, you already have three windows opened.
Multiple Editor Windows