Appendix A: Specifications
A-4
AWG610 Arbitrary Waveform Generator User Manual
Table A-5: Main output (Cont.)
Characteristics
3
PV reference pageDescription
Offset
Range -1.000 V to 1.000 V, into a 50 W load
Resolution 1mV
nAccuracy
"(1 % of offset + 10 mV),
(20 mV amplitude, waveform data: 0)
Page B-24
n Pulse response (Waveform data: -1 and 1, offset: 0 V, and filter: through) Page B-34
Rise time (10 % to 90 %)
x 750 ps (amplitude = 1.0 V
pĆp
, calculated value y 466 MHz)
Fall time (10 % to 90 %)
x 750 ps (amplitude = 1.0 V
pĆp
, calculated value y 466 MHz)
Aberration
"10 % (amplitude + 1.0 V
pĆp
, usingĂ6 GHz bandwidthĂoscilloĆ
scope)
Flatness
"3 % (after 20 ns from rise and fall edges)
Sinewave characteristics (Clock: 2.6 GS/s, waveform points: 32, frequency: 81.25 MHz,
amplitude: 1.0 V, offset: 0 V, filter: through)
nHarmonics
x -40 dBc (DC to 800 MHz)
Page B-36
nNoise
x -50 dBc (DC to 800 MHz)
Phase Noise,
Typical
x -85 dBc / Hz (10 kHz offset)
Direct DA out
Amplitude
Range 20 mV
pĆp
to1V
pĆp
,intoa50W load
nDC Accuracy
"(2 % of Amplitude+2mV)
Page B-29
Resolution 1 mV
n DC offset accuracy
0V" 10 mV, (20 mV amplitude, waveform data: 0)
Page B-29
n Pulse response (Waveform data: -1 and 1, at 0.5 V
pĆp
) Page B-34
Rise time (10 % to 90 %)
x 400 ps (calculated value y 875 MHz)
Fall time (10 % to 90 %)
x 400 ps (calculated value y 875 MHz)
3
The characteristics are specified at the end of the SMA cable (012Ć1565Ć00) except for DC accuracy.