Filter
Top Products
26-3
Waveform Memory Commands
SAVE
SAVE
Command :WMEMory<N>:SAVE {CHANnel<N> | WMEMory<N> | FUNCtion<N> | RESPonse<N>}
This command stores the specified channel, waveform memory, TDR response, or function to
the waveform memory. The channel or function must be displayed (DISPlay set to ON) or an
error status is returned. You can save waveforms to waveform memories whether the wave-
form memory is displayed or not. <N> is the memory number is an integer from 1 to 4.
NOTE This command operates on waveform data which is not compatible with Jitter Mode. Do not use this command
in Jitter Mode. It generates a “Settings conflict” error.
Example This example saves channel 1 to waveform memory 4.
10 OUTPUT 707;":WMEMORY4:SAVE chan1"
XOFFset
Command :WMEMory<N>:XOFFset <offset_value>
This command sets the x-axis, horizontal position for the selected waveform memory's dis-
play scale. Position is referenced to center screen. <N> is the memory number is an integer
from 1 to 4. <offset_value> is the horizontal offset (position) value.
Query :WMEMory<N>:XOFFset?
The query returns the current x-axis, horizontal position for the selected waveform memory.
Returned Format [:WMEMory<N>:XOFFset] <offset_value><NL>
Example This example sets the x-axis, horizontal position for waveform memory 3 to 0.1 seconds
(100 ms).
10 OUTPUT 707;":WMEMORY3:XOFFSET 0.1"
XRANge
Command :WMEMory<N>:XRANge <range_value>
This command sets the x-axis, horizontal range for the selected waveform memory's display
scale. The horizontal scale is the horizontal range divided by 10. <N> is the memory number
is an integer from 1 to 4. <range_value> is the horizontal range value.
Query :WMEMory<N>:XRANge?
The query returns the current x-axis, horizontal range for the selected waveform memory.
Returned Format [:WMEMory<N>:XRANge] <range_value><NL>
Example This example sets the x-axis, horizontal range of waveform memory 2 to 435 microseconds.
10 OUTPUT 707;":WMEMORY2:XRANGE 435E-6"
YOFFset
Command :WMEMory<N>:YOFFset <offset_value>
This command sets the y-axis (vertical axis) offset for the selected waveform memory. <N> is
the memory number is an integer from 1 to 4. <offset_value> is the vertical offset value.