Filter
Top Products
18-30
Measure Commands
RESults?
Table 18-3. Result States
Code Result Description
0 RESULT_CORRECT Result correct. No problem found.
1 RESULT_QUESTIONABLE Result questionable but could be measured.
2 RESULT_LESS_EQ Result less than or equal to value returned.
3 RESULT_GTR_EQ Result greater than or equal to value returned.
4 RESULT_INVALID Result returned is invalid.
5 EDGE_NOT_FOUND Result invalid. Required edge not found.
6 MAX_NOT_FOUND Result invalid. Max not found.
7 MIN_NOT_FOUND Result invalid. Min not found.
8 TIME_NOT_FOUND Result invalid. Requested time not found.
9 VOLT_NOT_FOUND Result invalid. Requested voltage not found.
10 TOP_EQUALS_BASE Result invalid. Top and base are equal.
11 MEAS_ZONE_SMALL Result invalid. Measurement zone too small.
12 LOWER_INVALID Result invalid. Lower threshold not on waveform.
13 UPPER_INVALID Result invalid. Upper threshold not on waveform.
14 UPPER_LOWER_INVALID Result invalid. Upper and lower thresholds are too close.
15 TOP_INVALID Result invalid. Top not on waveform.
16 BASE_INVALID Result invalid. Base not on waveform.
17 INCOMPLETE Result invalid. Completion criteria not reached.
18 INVALID_SIGNAL Result invalid. Measurement invalid for this type of signal.
19 SIGNAL_NOT_DISPLAYED Result invalid. Signal is not displayed.
20 CLIPPED_HIGH Result invalid. Waveform is clipped high.
21 CLIPPED_LOW Result invalid. Waveform is clipped low.
22 CLIPPED_HIGH_LOW Result invalid. Waveform is clipped high and low.
23 ALL_HOLES Result invalid. Data contains all holes.
24 NO_DATA Result invalid. No data on screen.
25 CURSOR_OFF_SCREEN Result invalid. Cursor is not on screen.
26 MEASURE_CANCELLED Result invalid. Measurement aborted.
27 MEASURE_TIMEOUT Result invalid. Measurement timed-out.
28 NO_MEAS Result invalid. No measurement to track.
30 INVALID_EYE Result invalid. Eye pattern not found.
32 BAD_DARK_LEVEL Result invalid. Dark level is invalid.
33 NOT_1_SOURCE Result invalid. Color grade/gray scale database has more
than one source.
34 NO_REF_PLANE Result invalid. No RZ eye pattern found.
35 BAD_RZ Result invalid. Excessive extinction ratio correction.
37 BAD_ER_CORR Result invalid. No TDR/TDT reference plane defined.